Inflation Unit
The core workflow of an inflation device is continuous and efficient. Upon startup, the power assembly first draws in air or a specified gas from the external environment. Subsequently, the gas is introduced into a compression mechanism, where it is pressurized through mechanical compression or volume displacement to generate sufficient inflation force. The pressurized gas is then directionally delivered to the target location via sealed pipelines and adaptive connectors. During this process, the built-in pressure sensor continuously monitors the air pressure inside the target location and feeds the data back to the control module for comparison against the preset pressure value. Once the detected air pressure meets the set standard, the control module immediately instructs the power assembly to shut down.
AC-C001/AC-CO02/AC-CO03/AC3000 Series/AIR-3000/AIR-2010
Automatic Tire Inflators
AC-CQ01
Wall-mounted automatic tire inflator operating at 220 V, with ±1.0 psi accuracy and a pressure range of 15–116 psi.
AC-CQ02
Vertical automatic tire inflator with a 10 L air-storage tank, 220 V power, ±1.0 psi accuracy and a pressure range of 15–116 psi.
AC-CQ03
Automatic single-outlet tire inflator with preset inflation and deflation, 85–240 V power, ±0.3 psi accuracy and a pressure range of 5–220 psi.
Automatic tire inflators and compressed-air treatment units for tire shops, service stations, garages, workshops, vehicle fleets and maintenance facilities. The range includes wall-mounted, vertical and single-outlet digital inflators, together with air filters, regulators and lubricators for non-corrosive, non-flammable compressed air.
Inflation Unit Product Range
TIRE SERVICE EQUIPMENT
Air Source Processing Units
AC3000-02D
1/4-inch compressed-air filter, regulator and lubricator unit with 40 μm filtration, 2,000 L/min flow and a 0.05–0.85 MPa pressure range.
AC3000-03D
3/8-inch compressed-air filter, regulator and lubricator unit with 40 μm filtration, 2,000 L/min flow and a 0.05–0.85 MPa pressure range.
AC4000-06D
3/4-inch compressed-air processing unit with 40 μm filtration, 4,500 L/min flow and a 0.05–0.85 MPa pressure range.
AC5000-10D
1-inch compressed-air processing unit with 40 μm filtration, 5,000 L/min flow and a 0.05–0.85 MPa pressure range.
AIR-3000
Air filter, regulator and lubricator for 1/8-, 1/4-, 3/8- and 1/2-inch connections, with 40 μm filtration and a 0.05–0.8 MPa pressure range.
AIR-2010
Air filter, regulator and lubricator for 1/4-, 3/8-, 1/2- and 3/4-inch connections, with 5 μm filtration and a 0.05–0.8 MPa pressure range.